Home > Products > Accessories
rcexl ignition use Mini tachometerv1.0
Author: DateTime:2009-8-29 17:59:18 Views: Tags:
Rcexl ignition use Mini tachometer
1. Use  PIC16f628a microcontrollers
2. Do not need batteries,Power from the  ignition
3. Standard FUTABA plug(Black-Negative Red-Positive and White-Signal)
4. Using high-brightness LED digital tube.
5. Input voltage range:3.5V-8.4V
6. Current consumption 25mA-60mA
7. Mini tachometer indicates up to 30000 rpm
8. Actual RPM= Display Digital *10
9. Body Size: 41mm L x 17mm W x 12mm H
10.Window Size: 30mm L x 15mm H
11.Weight:8.5g   (0.3OZ)
1.The Y wiring tandem between in the HALL sensor and the ignition.
2.The tachometer plug the other end with Y wire.
3.Connected to ignition power supply and can be displayed
That connecting plugs do Reinforcement. To prevent vibration.
The hall sensor & tachometer wire Leave from the Ignition high-voltage wire,
And receiver wires over 30cm
Connection tachometer is not recommended after the use of flight,
Best to remove the Y wire to restore the original sensor connection
If ignition  have an additional tachometer pinout.
You must be connected to dedicated tachometer signal wire.

Can not guarantee that other types of ignition can use the tachometer And guarantee accuracy
instructions to download:20098291757639172.pdf
Next Info:1/4-32 Spark plug & cap Assembly
CopyRight:rcexl.com 金华阿西尔电子有限公司
JinHua RC Electrinic CO.,LTD